In the New
 Clients
 Services
 Product  
WinTelecom | Samsung | Antenna Access | Barracuda | Canopy Wireless |
Aperto Networks

Aperto Networks
•
 PacketWave Product Solutions
•
 Point-to-Multipoint
•
 Point-to-Point
   

 

Point-to-Point

>> PacketWave® 600 Series Wireless Bridges

 
PacketWave® 600 Series Wireless Bridges
2.5 GHz, 3.5 GHz, 5.8 GHz


>> Download pdf file

 

PacketWave® 600 Series
Wireless Bridges
2.5 GHz, 3.5 GHz, 5.8 GHz

Aperto® Network’s PacketWave® wireless bridges offer a high-speed, cost-effective IP Ethernet bridge connection between locations with unprecedented nterference resilience and minimal spectrum usage.

The product supports a wide range of applications including high-speed backhaul of Wi-Fi™ hot spot and Universal Mobile Telecommunications System (UMTS)networks,a higher capacity alternative to T1/E1 connections or enterprise environments from one building to another.

PacketWave wireless bridges support 20 non-overlapping 6 MHz channels in the 5.8 GHz ISM band – more than five times the number of channels than all other available solutions.

Features

20 Mbps data rate per 6 MHz channel,12 Mbps net throughput

Range up to 49 miles (79 km)in 2.5 GHz,40 miles (64 km)in 3.5 GHz and 35 miles (56 km)in 5.8 GHz

Automatic Frequency Selection (AFS) switches to preselected channels dynamically when error rates are high

SNMP and Web-based management

Synchronization between units to support hub-site co-location of links and use of contiguous channels

Connectorized output for optional high gain antennas

 

High Interference Resilience
The PacketWave wireless bridges offer high interference immunity using Aperto ’s OptimaLink ® technology.OptimaLink dynamically changes several PHY and MAC parameters on a burst-by-burst basis.This provides a spectrally efficient link,yet robust enough to handle a wide variety of interference conditions.

The adaptive parameters include:
• Modulation
• ARQ (Automatic Re-transmissions)
• Payload size
• FEC (Forward Error Correction)

The PacketWave wireless bridges are the first to offer a synchronization option providing you the ability co- locate up to 32 wireless bridge units at the same location.Multiple units can be configured on adjacent channels with no frequency separation requirements.

External antenna connectors provide the flexibility to use various antenna options to address range requirements.

 

PacketWave 600 Series
5 GHz Wireless Bridge Specifications

Standard Interfaces
10/100 Base-T Ethernet:RJ-45 connector
IF Port:F connector;Cable length:up to 164 feet (50 meters);up to 328 feet (100 meters)with high-quality cable
Radio Control Port:RJ-45 connector;Cable length up to 328 feet (100 meters)
BNC Synchronization Port: up to 32 units

RF
Data Rates:20 Mbps per 6 MHz radio channel,12 Mbps net throughput
Modulation:QPSK,16 QAM
Duplexing:TDD
Receive Sensitivity:-82 dBm (16 QAM),-88 dBm (QPSK)
Automatic Frequency Selection
Frequency Band
Max TX Power*
Channel Sizes
2.5-2.686 GHz
23 dBm
4,5,6 MHz
3.4-3.7 GHz
20 dBm
ETSI: 1.75,3.5,7 MHz; Others: 4,5,6 MHz
5.725-5.925 GHz
20 dBm
4,5,6 MHz

*Depends on country regulatory requirements

Antennas
Antenna
Gain
(dBi)
16QAM Range*
Miles,(km)
 QPSK Range*
Miles,(km)		 Beamwidth Az and El Size Mounting Pipe Dia.inches (cm) Windloading
125 mph
(200 km/hr) Front/
Side lbs,(kg)
PPA2500-24
24.3
31.2 (50.2)
 42.1 (67.8) 9.5 °,9.5 ° 3 ft.(90 cm)dish 2.0-4.5
(5.1-11.4)		 492/40 (223/18)
PPA3500-24
24.2
24.1 (38.8)
 32.6 (52.4) 10 °,10 ° 2 ft.(60 cm)dish 2.0-4.5
(5.1-11.4)		 222/14 (100/6.4)
PPA5800-23
23.0
15.3 (24.6)
 20.6 (33.2) 9 °,9 ° 1 ft.(30.5 cm)square 1.75-3
(4.45-7.62)		 103/13.2 (47/6)
PPA5800-29
29.0
26.6 (42.8)
 35.5 (57.7) 9 °,9 ° 2 ft.(60 cm)dish 2.0-4.5
(5.1-11.4)		 222/14 (100/6.4)

*Line-of-sight depends on regulatory power limits.Other antenna options available.

Networking and Management
Bridge Architecture
SNMP;Web-Based Graphical Interface
Downloadable Code Updates and Configuration Changes
Java-Based Installation Manager and Antenna Pointing Tool

Indoor Unit (IDU)
Temperature Range: 0° to 40° C
Humidity: 10%-90% noncondensing
Power Requirements: 100-240 VAC; 47-63 Hz;30 watts		 Outdoor Unit (ODU)
Temperature Range: -35° to 60° C
Humidity: 10%-90% noncondensing
Mounting: 1.5 inches (3.8 cm)or 2.0 inches (5.1 cm) pole diameter
Wind Speed: 75 mph operation (120 km/hr); 125 mph survival (200 km/hr)

Unit
Size WxHxD inches (cm)
Weight lbs.(kg)
 Certifications
2.5 GHz Radio
13.4x13.4x1.9 (33x33x4.8)
7.5 (3.4))
 FCC Part 21
3.5 GHz Radio
11.8x11.8x1.9 (30x30x4.8)
7.0 (3.2)
 EN 301 753,EN 301 021
5.8 GHz Radio
8.1x8.1x1.9 (20.5x20.5x2.8)
4.4 (2.0)
 FCC 15.247
IDU
1.5x6.6x9.1 (3.8x16.8x23.1)
2.2 (1.0)
 FCC Class B,CE,EN

Ordering Information
PW600S-25-01 PacketWave 600 bridge pair,2.5 GHz radios with N connectors,sync port
PW601S-25-01 PacketWave 600 bridge pair,2.5 GHz radios with 24.3 dBi antennas,sync port
PW600S-35-01 PacketWave 600 bridge pair,3.5 GHz radios with N connectors,sync port
PW601S-35-01 PacketWave 600 bridge pair,3.5 GHz radios with 24.2 dBi antennas,sync port
PW600S-58-01 PacketWave 600 bridge pair,5.8 GHz radios with N connectors,sync port
PW601S-58-01 PacketWave 600 bridge pair,5.8 GHz radios with 23 dBi antennas,sync port
PW602S-58-01 PacketWave 600 bridge pair,5.8 GHz radios with 29 dBi antennas,sync port