In the New
 Clients
 Services
 Product  
WinTelecom | Samsung | Antenna Access | Barracuda | Canopy Wireless |
Aperto Networks

Canopy™
is faster than any other ISP option and delivers more reliable service.
•
 Overview
•
 Canopy Demo
•
 Tech Specs
•
 Product Catalog
   

 

Canopy™ Specifications
> Canopy™ Access Point Cluster and
Cluster Management Module		 > Canopy™ Backhaul Module
> Canopy™ Subscriber Module > Canopy™ Surge Suppressor
> Canopy™ Warranty Information  
>> Download Specs At A Glance (PDF)
   
 
Canopy Access Point Module 5200AP/5700AP
Operating Frequency Range U-NII Mid band 5.25 to 5.35 GHz and 5.725 to 5.825 GHz
Access Method TDD/TDMA
Signaling Rate 10 Mbps
Modulation Type High Index BFSK
(Optimized for interference rejection)
Carrier to Interference (C/I) 3dB 10 -4 BER @ -65 dBm
Receiver Sensitivity -83dBm 10 -4 BER
Operating Range Up to 2 miles with integrated antenna in the 5.2 GHz band.?Up to 10 miles with passive reflector in the 5.7 GHz band.
Transmitter Power Meets FCC UNII ERP Limit
DC Power 24 VDC @ 0.3 Amp (active state)
Interface 10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)
Protocols Used by CANOPY IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP
Software Upgrade Path Remotely downloaded into FLASH via RF link
Network Management HTTP, TELNET, FTP, SNMP
Wind 190 km/hr (118 miles/hr)
Operating Temperature -40?C to +55?C (-40?F - +131?F)
Weight 1 lb. (.45kg)
Dimensions 11.75" H x 3.4" W x 3.4" D?(29.9 cm H x 8.6 cm W x 8.6 cm D)
Canopy Cluster Management Module 1008CK
:: Limits or Conditions ::
Max length any one radio can be from Cluster Management Module 328 cable feet (100 Meters)
Max length from Cluster Management Module to GPS antenna 100 cable feet (30.5 Meters)
Dimensions 17.00" H x 12.88 " W x 6.50" D (43.18 cm H x 32.72 cm W x 16.51 cm D)
Weight 25.0 lbs. (11.3 kg)
Operating Temperature -40°F - +131°F (-40°C - +55°C)
Overall Meets CE IP44 according to EN60529:2000
AC Power
:: Limits or Conditions ::
AC input voltage

100 V - 240 V ~, 0.7 A - 0.35 A
Note: Applying 230 V to a unit which set to 115V may damage the unit.

AC frequency 50 Hz to 60 Hz
AC input power Nominal 66 watts, max 92 watts with 8 modules connected to the CMM at max cable length.
24 VDC Power Supply
:: Limits or Conditions ::
Input Voltage 17 to 32 VDC, measured at CMM
Input Power Nominal 60 watts. Maximum 84 watts with 8 modules connected to the CMM at maximum cable length. 9A inrush upon start-up.
Use Note if using a typical "24V +/-5%" power supply, ensure that CMM is within 400 cable feet (120 m) of the power supply. Minimum 12 AWG copper wire.
12 VDC Power Supply
:: Limits or Conditions ::
Input Voltage 11.5 to 32 VDC, measured at CMM
Use Note If using a 12 V power source (typically an automobile batter in a test or emergency situation), use 12 AWG (4 mm2) wire between the power supply and the CMM, ensure that the CMM is within 10 cable feet (3 m) of the power supply, and ensure the modules are within 20 cable feet (6 m) of the CMM.
Cable Specifications
:: Limits or Conditions ::
Ethernet, GPS sync, and GPS coax cables The use of cables that conform to the operational temperature of the product as well as being UV light protected is mandatory. See Accessories for retailer of cables.
>> TOP 
 
Canopy Subscriber Module
Canopy Subscriber Module
5200SM/5700SM
Operating Frequency Range U-NII Mid band 5.25 to 5.35 GHz and 5.725 to 5.825 GHz
Access Method TDD/TDMA
Signaling Rate 10 Mbps
Modulation Type High Index BFSK
(Optimized for interference rejection)
Carrier to Interference (C/I) 3dB 10 -4 BER @ -65 dBm
Receiver Sensitivity -83dBm 10 -4 BER
Operating Range
(all weather)		 Up to 2 miles with integrated antenna in the 5.2 GHz band.?Up to 10 miles with passive reflector in the 5.7 GHz band.
Transmitter Power Meets FCC UNII ERP Limit
DC Power 24 VDC @ 0.3 Amp (active state)
Interface 10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)
Protocols Supported by CANOPY Switched Layer 2 Transport with support for all common Ethernet protocols including IPV6, NetBIOS, DHCP, IPX, etc.
Protocols Used by CANOPY IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP
Software Upgrade Path Remotely downloaded into FLASH via RF link
Network Management HTTP, TELNET, FTP, SNMP
Wind 190 km/hr (118 miles/hr)
Operating Temperature -40?C to +55?C (-40?F - +131?F)
Weight 1 lb. (.45kg)
Dimensions 11.75" H x 3.4" W x 3.4" D (29.9 cm H x 8.6 cm W x 8.6 cm D)
>> TOP 
 
Canopy Backhaul Module
Canopy Backhaul Module
5700BH
Operating Frequency Range U-NII Mid band 5.725 to 5.825 GHz
Access Method TDD/TDMA
Signaling Rate 10 Mbps
Modulation Type High Index BFSK
(Optimized for interference rejection)
Carrier to Interference (C/I) 3dB 10 -4 BER @ -65 dBm
Receiver Sensitivity -83dBm 10 -4 BER
Operating Range
(all weather)		 Up to 2 miles with integrated antenna. Up to 35 miles with installed passive reflectors.
Transmitter Power Meets FCC UNII ERP Limit
DC Power 24 VDC @ 0.3 Amp (active state)
Interface 10/100 BaseT, half/full duplex
Rate auto negotiated (802.3 compliant)
Protocols Supported by CANOPY Switched Layer 2 Transport with support for all common Ethernet protocols including IPV6, NetBIOS, DHCP, IPX, etc.
Protocols Used by CANOPY IPV4, UDP, TCP, ICMP, Telnet,
HTTP, FTP, SNMP
Software Upgrade Path Remotely downloaded into FLASH via RF link
Network Management HTTP, TELNET, FTP, SNMP
Wind 190 km/hr (118 miles/hr)
Operating Temperature -40?C to +55?C (-40?F - +131?F)
Weight 1 lb. (.45kg)
Weight With Passive Reflector 6.5 lbs. (3 kg)
Dimensions 11.75" H x 3.4" W x 3.4" D (29.9 cm H x 8.6 cm W x 8.6 cm D)
>> TOP 
 
Canopy Surge Suppressor
Canopy Surge Suppressor
300SS
Dimensions H 5.2" x W 5.0" x D1.7"
H 132 mm x W 127 mm x D 43.2 mm
Space between mounting holes 4.25" (108 mm)
Size of knockouts 0.75" (19 mm)
Weight 0.4 lbs. (180 g)
Operating Temperature -40?C to +55?C (-40?F to 131?F)
Internal Connectors RJ45
Capacity 1500J peak pulse energy dissipation
with 10/10000?s waveform
>> TOP 
 
Canopy(TM) Warranty Information
The latest warranty terms:-
Canopy Standard Warranty Terms and Conditions
Hardware Warranty
Coverage Period 12 months from the date of purchase
Warranty Commitment Hardware will conform to the current published specifications and will be free from material defects in material and workmanship under normal use and service
What's Included

• Repair or replacement of a defective unit
• Paid shipment from Motorola back to the customer.
Software Warranty
Coverage Period 90 days from the date of purchase
Warranty Commitment Software will perform substantially in accordance with Motorola’s published specifications for that release level of the software and will be free from material defects in material and workmanship under normal use and service
What's Included

• Correction or replacement of software to correct
  significant, demonstrable program or documentation
  errors
• Replacement of defective media
>> TOP